• The most complete electronic regulator with automatic reset for the extremely simple creation of pressurization units for residental and irrigation systems.
The most essential characteristic of SuperSimplex E are:
• A single product for the automation of electro-pumps with head of between 1.5 and 8 bar
• It stops the pump protecting it against dry running
• Automatic restarts each 15' or 30'
• High water temperature protection (55°C) and automatic restart (45°C)
SuperSimplex E is set at the factory for the control of pumps with head of 4-8bar and for re-starting at 1.5bar. In such conditions no setting is needed, simply discharge the air from the system keeping the service button pressed and SuperSimplex E is ready to control the pump.
• Dry running protection and triggers endless restart
• Any mounting position available

FUNCTION:
SuperSimplex monitors the pressure that exits inside the piping and the presence of flow. At the minimal pressure P(r), set up for the system, the SuperSimplex activates the pump. The flow gauge inside the SuperSimplex keeps the pump in operation; when the water colection operation is over and with maximum pressure, SuperSimplex acts to disenable the pump with delay of few seconds.
Warning: SuperSimplex does not limit the max pressure of the pump, if necessary install a pressure reducer downstream.

SuperSimplex prati pritisak i protok unutar cevovoda. Na minimalnom pritisku u sistemu SuperSimplex aktivira pumpu. Manometar unutar SuperSimplex-a održava pumpu u radu, kada je sakupljanje vode završeno i pritisak je maksimalan, SuperSimplex gasi pumpu za kašnjenjem od par sekundi.